Fixposition Connection ====================== .. figure:: media/pictures/ethernet.png :width: 70% :align: center Network Setup ------------- To set up a connection to the Fixposition (LAN), please follow the provided guidelines: #. Connect an Ethernet cable from your Host PC to the Ethernet port of the Fixposition. #. Next in your Host PC, create a static connection from your network manager with an ip of ``10.0.2.51``. For the netmask, use ``255.255.255.0``. #. Once the static connection is setup correctly, the web interface can be accessed at ``10.0.2.1``. .. important:: For connection and setup of the Fixposition device please follow the guide provided by Fixposition `Fixposition Quick Start Guide `__ Once the Fixposition has its hardware components connected and turned on. Please connect to it via the provided ethernet cable or the on-board hotspot. Network tables -------------- The Fixposition has multiple networks and vary depending on the connection type, the following table shows the networks. .. table:: Fixposition network devices ============================= ======================= ============== ============== Device Network Address Users\\SSID Password ============================= ======================= ============== ============== Fixposition (WiFi) 10.0.1.1 fp-****** 1234567890 Fixposition (LAN) 10.0.2.1 N/A N/A ============================= ======================= ============== ============== Further information on network configuration is provided on the user integration manual that comes with the Fixposition.